High Resolution, High Accuracy Ethernet DAQ Device

DT8824 - 4-Cahnnel Precision Measurements over Ethernet

The DT8824 offers the highest stability and accuracy for measuring analog signals. Every signal input is fully isolated from each other. This technology, ISO-Channel, guarantees that all signals are protected from any environmental or system noise.

The high stability design of the DT8824 delivers data acquisition results that are twenty times better than the normal solution from another system.

The TCP/IP Ethernet operation allows measurements to be monitored locally or at other remote sites. Up to 16 instrument modules can be stacked for parallel operation of 64 voltage inputs. These modules are synchronized via the Wired Trigger Bus and can be externally triggered in various ways.

The DT8824 is ideally suited for chromatography, seismic, weigh scale, and medical applications where accuracy and stability are imperative. The rugged, compact module can be used as a portable device or mounted in a rack.

DT8824 - 4-Cahnnel Precision Measurements over Ethernet

  • 4, simultaneous, 24-bit analog input channels
  • ISO-Channel technology provides ±500 V galvanic isolation channel-to-channel for all analog input signals and to the host computer ...guarantees noise immunity
  • Input ranges per channel from 0.3125V up to ±10V ...allows maximum flexibility for any signal input
  • Sampling rate up to 4800Hz per channel
  • 4 opto-isolated digital output lines; the outputs are solid-state relays that operate from 30 V at currents up to 400 mA (peak) AC or DC
  • Software-programmable trigger type (software, external digital trigger, Trigger Bus, or LAN trigger) to start analog input operations
  • Synchronization reference clock, ADC sync and trigger input/output via LXI Trigger Bus for synchronizing multiple up to 16 instrument modules
  • IVI-COM instrument driver for .NET, LabVIEW, VEE, MATLAB, LabWindows/CVI development
  • Collection of Drivers, SCPI support, and manuals on CD
  • Integrated Calibration Utility
  • Use free QuickDAQ data logger application
  • Metal case, mains power supply EP361, and LAN cable included
  • dimensions: 213x237x44 mm, rack mountable, (1U by 1/2 rack)
产品 软件 附件 文档 更多信息 下载 可选

High Resolution, High Accuracy Ethernet InstrumentDT8824
High Resolution, High Accuracy Ethernet Instrument



  • Input ranges per channel: 10V, 1.25V, 0.625V, 0.3125V
  • common mode voltage range 500V

LXI Wired Trigger Bus CableEP377
LXI Wired Trigger Bus Cable

  • synchronization cable
  • for use with DT8837, DT8824, or VIBbox
  • length 0.5m

Single Rack-Mount Kit


  • 19" mounting kit for a single instrument
  • for DT8837, DT8824, DT9824, and DT9862

Dual Rack-Mount Kit


  • 19" kit for mounting two instruments side by side
  • for DT8837, DT8824, DT9824, and DT9862

Free Data Logger Application - Upgradeable with FFT Analysis OptionsQuickDAQ
Free Data Logger Application - Upgradeable with FFT Analysis Options

  • Two extensions add FFT analysis capabilities to the free base package.
  • QuickDAQ FFT Analysis Options allow serious sound & vibration analysis supporting modal analysis and ODS analysis methods.
  • Single-Channel and Dual-Channel (frequency response) FFT operations

显示文件 Datasheet
显示文件 Specifications
显示文件 User's Manual
显示文件 SCPI Manual
SCPI (Standard Commands for Programmable Instruments) is an universal programming language for electronic test and measurement instruments, based on the IEEE 488.1 and IEEE 488.2 standards. DT8824 complies with the SCPI language and implements the IEEE-488.2 STD status structure. You can issue SCPI commands over VISA or sockets.
显示文件 Rear Panel
显示文件 Web Application Oscilloscope
显示文件 Web Application Spectrum
显示文件 Web Application Info
显示文件 Web Application Download
显示文件 Web Application Calibration
显示文件 Block Diagram
显示文件 Using DT8824 with MATLAB
Using the Instrument Control Toolbox™ from The MathWorks™, you can access the functions of the DT8824.
显示文件 More Information on LXI
LXI is an instrumentation platform based on industry standard Ethernet technology designed to provide modularity, flexibility and performance to small- and medium-sized systems. ..
显示文件 More Information on IVI
Build you own applications based on Visual C++, Visual C# and Visual Basic .NET, Visual Basic 6.0, LabVIEW, LabWindows/CVI, MATLAB, Keysight VEE Pro.
显示文件 Why ISO-Channel Technology is Your Best Return on Investment
When connecting signal sources it is important to eliminate the sources of error that can contribute to inaccuracies in your measurements. In most measurement instruments, this burden is on the customer. Instruments that use ISO-Channel ...
显示文件 ISO-Channel Protection
to eliminate any common mode noise and ground loop problem in any environmental conditions
显示文件 Driver for Instrument Control Toolbox in MATLAB/Simulink
Using the Instrument Control Toolbox from The MathWorks, you can access the functions of Data Translation's instrument modules. The Instrument Control Toolbox communicates with DT instruments through a MATLAB driver to the instruments IVI-COM driver.
显示文件 Release Notes
显示文件 DT8824 Support Software (253 MB)
- IVI-COM driver
- Eureka Discovery Utility
- SCPI Support (manual and examples)
- QuickDAQ 2013
High Resolution, High Accuracy USB Module DT9824
DT9824 ... with USB interface

显示文件 Simultaneous Data Acquisition Overview

One Measurement Group Limited, ChinaPhone: +20-85262155Fax: +20-85261105Email: sales@omgl.com.cn
Measurement Computing GmbHPhone: 0049-7142-9531-0Fax: 0049-7142-9531-13Email: Info@MCCdaq.de